SANDBOX — this is a test environment. No servers are actually deployed and no real payments are charged.
Source-checkedQuality of life & UI

SkillLimitExtenderFork

by Snuffy · for Valheim

A Valheim 1.0.x fork of SkillLimitExtender that raises skill caps beyond 100

150Downloads
46d agoLast updated
BepInExLoaders
ThunderstoreSource

About SkillLimitExtenderFork

From Thunderstore

A Valheim 1.0.x fork of SkillLimitExtender that raises skill caps beyond 100

Skill Limit Extender Fork

The main goal of this mod is to reward players who are willing to work long and hard, pushing their skills beyond normal limits until they eventually reach godlike levels.

A Valheim 1.0.x fork of SkillLimitExtender that raises skill caps beyond 100, adds configurable XP curves, and makes skill effects continue scaling safely past vanilla limits. It includes extended damage and blocking, asymptotic stamina/eitr/health and action-time scaling, safer tool costs, optional Jump-based safe-fall scaling, mod-skill support, UI fixes, save-data safeguards, and server-synchronized configuration.

This fork is intended as a replacement for the original SkillLimitExtender 1.2.0 plus its Valheim 1 compatibility/damage patches. Do not install those packages alongside this fork.

Features

  • Skill caps above the vanilla level-100 limit.
  • Separate per-skill Cap and BonusCap.
  • Custom XP growth curves for every skill.
  • Damage scaling above level 100.
  • Blocking scaling based on the same configurable extended multiplier as damage.
  • Safe post-100-percent scaling for stamina, eitr, health costs, action times, and supported tool durability costs.
  • Extended bow draw speed and crossbow reload speed.
  • Extended Run, Swim, Dodge, Sneak stamina, Fishing, and Riding cost scaling.
  • Optional Jump-based safe-fall-distance scaling.
  • Automatic configuration sections for vanilla skills and discovered mod skills.
  • Skill UI support for extended caps, plus invalid-entry sanitization.
  • Character skill-data sanitization to prevent invalid skill entries from breaking the skills UI or save data.
  • Server configuration synchronization and version/protocol checks.
  • Normal BepInEx .cfg configuration only — Jotunn and YamlDotNet are not required.

Default behavior

The default configuration stays fairly close to vanilla for skill levels 0–100, while extending progression far beyond the vanilla cap.

Skills can level up to 1000, while their normal skill-effect factor stops increasing at 500 by default unless BonusCap is changed.

The default experience curve is designed so that:

  • Levels 0–10 are slightly slower than vanilla.
  • Levels 11–60 are slightly easier than vanilla.
  • Levels 61–90 are close to vanilla progression.
  • Levels 91–100 become somewhat harder than vanilla.
  • Levels 101+ become progressively much harder to achieve.

This keeps the early and mid-game progression familiar while making very high skill levels a long-term goal rather than something reached quickly.

As for the effect of each skill level, levels 0–100 behave the same as vanilla. Starting from level 101, the additional effect becomes progressively weaker as the skill increases.

This prevents effects such as stamina, eitr, or health-cost reductions from ever reaching 100% reduction or going beyond it into negative values, which would otherwise cause unintended behavior such as restoring stamina instead of consuming it.

Requirements

  • Valheim 1.0.x
  • BepInExPack for Valheim

For multiplayer, use the same version of the mod on the server and clients.

Installation

Install through a Thunderstore-compatible mod manager, or place the compiled DLL in:

BepInEx/plugins/SkillLimitExtender/

Start the game once to generate:

BepInEx/config/SkillLimitExtender.cfg

If upgrading from the original SkillLimitExtender setup, remove:

  • the original SkillLimitExtender DLL/package;
  • SkillLimitExtenderValheim1Compat;
  • any separate SkillLimitExtender damage patch;
  • old Jotunn/YamlDotNet dependencies if no other installed mod requires them.

Legacy SLE_Skill_List.yaml files are ignored by this fork.

Default skill settings

Every vanilla skill starts with the following configuration:

| Setting | Vanilla behavior | Fork default | |---|---|---| | Maximum skill level | 100 | Cap = 1000 | | Maximum skill-effect factor | 1.0 at level 100 | BonusCap = 500 → maximum factor 5.0 | | Factor calculation | Effectively level / 100 up to 1.0 | Relative = false → level / 100, capped by BonusCap | | Custom XP curve | No | UseCustomGrowthCurve = true | | XP exponent | 1.5 | GrowthExponent = 2.1 | | XP multiplier | 0.5 | GrowthMultiplier = 0.04 | | XP constant | 0.5 | GrowthConstant = 8.0 |

With the defaults:

skillFactor = min(level / 100, BonusCap / 100)

Therefore:

| Skill level | Vanilla factor | Fork default factor | |---:|---:|---:| | 0 | 0.00 | 0.00 | | 50 | 0.50 | 0.50 | | 100 | 1.00 | 1.00 | | 200 | capped at 1.00 | 2.00 | | 300 | capped at 1.00 | 3.00 | | 500 | capped at 1.00 | 5.00 | | 1000 | capped at 1.00 | 5.00 because BonusCap = 500 |

Cap controls how high the stored skill level can become. BonusCap separately controls how far most skill effects are allowed to scale.

Default XP curve

The vanilla next-level requirement is:

XP = nextLevel^1.5 * 0.5 + 0.5

The fork default is:

XP = nextLevel^2.1 * 0.04 + 8.0

where:

nextLevel = floor(currentLevel + 1)

The default curve is slightly easier through much of the early game, crosses vanilla around the higher vanilla levels, and becomes increasingly harder at extended levels.

| Current level | Vanilla XP for next level | Fork default XP for next level | |---:|---:|---:| | 0 | 1.00 | 8.04 | | 10 | 18.74 | 14.15 | | 50 | 182.61 | 162.15 | | 100 | 508.02 | 655.34 | | 200 | 1,425.33 | 2,754.45 | | 300 | 2,611.58 | 6,420.83 | | 500 | 5,607.45 | 18,702.73 | | 999 | 15,811.89 | 79,818.49 |

Default extended scaling

The global extended-scaling defaults are:

[3 - Extended Scaling]
EnableDamageScaling = true
DamageReferenceSkillLevel = 200
DamageReferenceMultiplier = 1.5
VanillaDamageMultiplier = 1.0
VanillaDamageExponent = 1.0
EnableExtendedCostScaling = true
ExtendedCostExponent = 0.42
EnableBlockingScaling = true
ScaleSafeFallDistance = true
SafeFallDistanceExponent = 2.0

Read the full description on Thunderstore →

Highlights

From source data

Loaders

Runs on BepInEx.

Footprint

Rated a light load on a server.

Last update

Its author last shipped an update 46d ago.

SkillLimitExtenderFork on Nxeon

From our catalogue
One-click install
Supported on Nxeon Valheim servers, for BepInEx servers. We download it from Thunderstore, place it, and restart the server.
Server side
Optional on the server
Server type needed
BepInEx
Server load
light
Smallest plan we suggest
Valheim — 2 GB (2 GB RAM). This follows our own load rating above, not a benchmark.
Latest build
1.0.0, released 2026-10-07

Game versions by loader

LoaderGame versionsNewest
BepInEx

From 1 recorded build of SkillLimitExtenderFork.

Dependencies

Declared by the newest build that lists any. Required ones are installed with it on one-click installs.

Run SkillLimitExtenderFork on a Valheim server

Pick a server or deploy a new one above; it is installed in one click.

What kind of mod it is

From the catalog
Listed on Thunderstore as “Tweaks”

Quality of life & UI

Small conveniences, tweaks and interface improvements players notice straight away.

Works on a server

From source side support

Thunderstore lists server-side support for SkillLimitExtenderFork as optional: it can run on a server, but isn’t required there.

Compatibility

Game
Valheim
Loaders
BepInEx
Runs on
Serveroptional on the server
Requires
One-click install needs a BepInEx server.

Verified at the source

  • ✓ThunderstoreOfficial listing, checked 2026-10-15Open ↗
  • ✓AuthorSnuffy, as published on Thunderstore
  • ✓LicenseNot published by the sourceFree

SkillLimitExtenderFork, answered

Generated from the mod’s own source data.

Do my players need to install SkillLimitExtenderFork?

Thunderstore lists server-side support for SkillLimitExtenderFork as optional: it can run on a server, but isn’t required there.

Which loaders does it support?

BepInEx.

Is it free?

Yes. SkillLimitExtenderFork is free to download from Thunderstore.

How do I add it to my Nxeon server?

Use “Add to a server” on this page, or open NxLabs from your dashboard. We install it, restart your server and switch it on.

NxLabs

Run SkillLimitExtenderFork on a Valheim server.

Deploy in about a minute from $6.50 a month, then add SkillLimitExtenderFork in one click.