About Powered Belts Extended
From Factorio Mod PortalBelts, splitters and loaders now need power and can be can be made more efficient through research.
Belts now need power in Factorio 2.0+
Powered Belts Extended makes every belt network entity consume electricity, including modded entities. Transport belts, underground belts, splitters, and loaders are monitored and automatically switch off during power shortages.
- Mod Portal: https://mods.factorio.com/mod/PoweredBeltsExtended
- GitHub: https://github.com/PiotrKaszuba/PoweredBeltsExtended
Core Mechanics
Everything Belt-Like Needs Power
The mod creates hidden electric power entities for:
transport-beltunderground-beltsplitterloaderloader-1x1
This includes vanilla and modded prototypes present in the game.
Helper power entities and unpowered belt variants are localized and hidden from Factoriopedia to reduce UI clutter.
Power Usage Scales by Entity
Power draw is computed from belt speed and entity type, then scaled by startup settings and efficiency research. Speed scaling is normalized around yellow belt speed (0.03125) and supports an exponent startup setting: (belt_speed^e) / (yellow_belt_speed^e).
Default type multipliers:
- Transport belt:
x1 - Underground belt:
x(max_distance + 3) / 2 - Splitter:
x5 - Loader 1x1:
x5 - Loader:
x10
Underground belt power is calculated from the pair’s maximum segment length, plus 2 for down/up transitions, then divided by 2 so each end consumes half.
On/Off Behavior During Brownouts
Belts switch between powered and unpowered variants based on stored energy in hidden power interfaces. This is threshold-based switching, not gradual speed throttling.
In edge cases, this means a tiny power source can keep many belts running as long as they do not drop below the threshold.
During brownouts, entities can switch at different times depending on:
- input flow limit,
- buffer capacity,
- effective threshold,
- update-order timing.
This can stall lines (especially fuel routes) and delay recovery.
Entities marked for deconstruction are not toggled by this logic to avoid interfering with planner/ghost behavior.
Power Buffer Mechanics (Technical)
For each powered belt entity:
energy_usage = ei(kW)input_flow_limit_kw = max(ei, ei*ifl_mult + 0.1*ifl_flat)buffer_capacity_kj = max(0.001, ei*bc_mult)(>= 1J)
Runtime threshold values:
X = clamp(threshold_pct + threshold_flat, 0, 100)H = clamp(hysteresis_pct, 0, 33) / 100down_pct = clamp((1-H)*X, 0, 100)up_pct = clamp((1+H)*X, 0, 100)
Switching rules:
- power down when
energy < down_energy, - power up when
energy >= up_energy.
Boundary behavior is intentional: near 0%/100%, one side of the hysteresis window shrinks (possibly to zero).
Approximate timings from idealized states:
t_off ~= (B - B*down_pct/100) / eit_on ~= (B*up_pct/100) / max(I - ei, 0)whereI = input_flow_limit_kwandB = buffer_capacity_kj
Preset Modes
default
Legacy behavior: higher-usage entities typically need longer to charge, so different entities (and often tiers) can power up/down at different times.
synchronized
Ratio-based tuning with no flat offsets, targeted to keep different entity types closer in transition timing. Also tuned so idealized full-charge startup time and full-discharge shutdown time are equal.
responsive
Same synchronization goal, but faster reaction to grid changes (higher charge headroom, smaller buffers). Adds hysteresis to reduce rapid flicker in unstable networks and lower replacement churn/UPS overhead.
custom
Enables detailed tuning. Defaults mirror default, so switching to custom does not change behavior until edited.
Preset-locked values:
default:ifl_mult=1.0,ifl_flat=10,bc_mult=1.0,threshold_pct=50,threshold_flat=0,hysteresis=0synchronized:ifl_mult=2.0,ifl_flat=0,bc_mult=1.0,threshold_pct=50,threshold_flat=0,hysteresis=0responsive:ifl_mult=5.0,ifl_flat=0,bc_mult=0.25,threshold_pct=50,threshold_flat=0,hysteresis=10
Underground Belt Item Safety
In similar mods (and originally in Powered Belts) items in underground belts disappear due to sequential entity replacement which immediately breaks their transport lines and removes held items from the game. This version implements replacement logic that preserves items in a temporary inventory while entities are swapped and then places them back in their original positions if possible - otherwise, as a fallback, items are spilled at the underground belt's position.
Technology: Belt Transport Efficiency
Configurable upgrade levels are added (efficient-belts-1 to efficient-belts-N, where N is startup setting powered-belts-num-upgrades).
- Each level reduces belt-related power usage by the configured startup fraction.
- Reduction stacks multiplicatively.
- Default reduction is
20%per level (100% -> 80% -> 64% -> 51.2% -> ...). - Science pack count per level is configurable via
powered-belts-efficiency-tech-cost-per-level(default50). 25= half cost (0.5x),50= vanilla mod default (1x),200= four times cost (4x).- This scaling also applies to the higher incremental costs on levels above 6.
Settings
Startup
powered-belts-usage-multiplier(default0.2)
Scales all belt power usage globally.
powered-belts-speed-exponent(default1.0, min0.0, max3.0)
Controls nonlinear speed-to-power scaling around yellow belt speed (0.03125). 1.0 matches linear behavior.
powered-belts-energy-behavior-preset(defaultdefault)
Selects energy behavior profile: default, synchronized, responsive, or custom.
powered-belts-input-flow-limit-multiplier(default1.0, min1.0, max10.0)
Detailed startup tuning, active only when preset is custom.
Highlights
From source dataFootprint
Rated a light load on a server.
License
Published under MIT.
Last update
Its author last shipped an update 26d ago.
Powered Belts Extended on Nxeon
From our catalogue- One-click install
- Supported on Nxeon Factorio servers. We download it from Factorio Mod Portal, place it, and restart the server.
- Server side
- Required on the server
- Server load
- light
- Smallest plan we suggest
- Factorio — 2 GB (2 GB RAM). This follows our own load rating above, not a benchmark.
- Latest build
- 1.3.2, released 2026-10-27
Recent builds
| Build | Released | Game versions | Loaders |
|---|---|---|---|
| 1.3.2 | 2026-10-27 | 2.0 | n/a |
| 1.3.1 | 2026-03-13 | 2.0 | n/a |
| 1.3.0 | 2026-03-05 | 2.0 | n/a |
| 1.2.3 | 2026-02-26 | 2.0 | n/a |
| 1.2.2 | 2026-02-25 | 2.0 | n/a |
| 1.2.1 | 2026-02-23 | 2.0 | n/a |
Dependencies
- Optional: Black Rubber Belts - Remastered
- Optional: AAI Loaders
- Optional: Loader Utilities
- Incompatible with: Powered Belts
- Incompatible with: Electric Powered Belts
- Incompatible with: Electric Powered Belts Fixed
- Incompatible with: Disaster Core Belts
Declared by the newest build that lists any. Required ones are installed with it on one-click installs.
Run Powered Belts Extended on a Factorio server
Pick a server or deploy a new one above; it is installed in one click.
What kind of mod it is
From the catalogTechnology & automation
Machines, power, logistics and automation.
Runs on your server
From source side supportFactorio Mod Portal lists Powered Belts Extended as required on the server. Check its Factorio Mod Portal page to see whether players need it too.
Compatibility
- Game
- Factorio
- Runs on
- Serverrequired on the server
Verified at the source
- ✓Factorio Mod PortalOfficial listing, checked 2026-10-27Open ↗
- ✓Authordiabolicwolf, as published on Factorio Mod Portal
- ✓LicenseMITFree
